The Baxi 630 Combi is a 30kW gas combi from Baxi’s 600 range, and it’s a good fit for small to medium homes with one bathroom. It gives 12.2 litres of hot water per minute, which is enough for one shower at a time with a little to spare. Want a Baxi 630 fitted at a fixed price? Find out more about our Baxi boiler installation service.
It’s also no longer made. Baxi replaced it with the 630 Combi 2. This review is for owners of the original who want to know where it stands, and for anyone comparing the Combi 2 with other 30kW combis.
What Are The Key Specs Of The Baxi 630 Combi?
The original 630 gives 30.9kW for hot water, 21.2kW for heating and 12.2 l/min, while the Combi 2 raises heating output to 27.1kW. Both are A-rated and almost identical in size.
| Specification | Baxi 630 Combi (original) | Baxi 630 Combi 2 (current) |
| Boiler type | Gas condensing combi | Gas condensing combi |
| Hot water output | 30.9kW | 30kW |
| Max central heating output | 21.2kW | 27.1kW |
| Hot water flow rate (35°C rise) | 12.2 l/min | 12.2 l/min |
| ErP rating | A (heating and hot water) | A (heating and hot water) |
| Dimensions (H x W x D) | 700 x 390 x 285mm | 700 x 395 x 285mm |
| Fuel | Natural gas (separate LPG model) | Natural gas or LPG (manual conversion) |
| Status | Discontinued | Current model |
What Is The Baxi 630 Combi?
It’s the middle model in Baxi’s 600 combi family, sitting between the smaller 624 and the larger 636. All three share the same casing and features. Output is the only real difference, so the choice comes down to how much hot water you use and how much heat your home needs.
Like any combi, it heats water straight from the mains when you turn on a tap. There’s no hot water cylinder and no cold water tank in the loft.
That frees up space, and it suits homes where only one tap or shower tends to run at a time.
Baxi is a long-established British boiler maker with manufacturing in Preston, Lancashire, and its boilers are widely fitted across the UK. For owners, the practical upside is that spare parts are easy to get and most heating engineers know the 600 range well. You can read more about the brand in our Baxi boilers review.
What Features Does The Baxi 630 Have?
The main ones are a 285mm-deep casing, a light 29kg lift weight, a stainless steel heat exchanger and an Easy-Fill filling link. In day-to-day use, these are the features you’ll notice:
- Compact size: at 285mm deep it fits inside a standard kitchen wall cupboard, so you can hide it away.
- Light weight: the lift weight is around 29kg, which keeps installation straightforward.
- Stainless steel heat exchanger and brass hydraulics: sturdier materials than the plastic internals you’ll find on some budget boilers.
- Easy-Fill permanent filling link: you can top up system pressure yourself without hunting for a loose filling key.
- Digital display: shows temperatures and fault codes, so an engineer can diagnose problems quickly.
- Controls: works with standard room thermostats and on/off smart thermostats. See our smart thermostats page for options.
The 630 Combi 2 keeps the same footprint and adds a couple of practical upgrades.
One is a pre-heated condensate trap, which cuts the risk of winter lockouts from a frozen condensate pipe. The other is manual conversion between natural gas and LPG, with no separate kit needed.
How Efficient Is The Baxi 630 Combi?
It’s ErP A-rated for heating and hot water, with a seasonal efficiency of around 89% on Baxi’s published figures. That’s in line with most modern gas combis.
If you’re replacing a non-condensing boiler from the early 2000s or before, you may notice the drop in gas use.
How the boiler is set up matters more than the badge on the front. A combi only condenses fully, and so hits its rated efficiency, when the water coming back from the radiators is cool enough. We usually point owners to three things: a lower heating flow temperature, weather or load compensation where it can be fitted, and a magnetic filter to keep the system clean.
What Are The Pros And Cons Of The Baxi 630?
Its biggest strengths are its compact size and easy installation. The main drawbacks are that it’s discontinued and the original only gives 21.2kW for heating.
Pros
- Small enough to fit in a kitchen cupboard
- Light and quick to install, which helps keep labour costs down
- 12.2 l/min of hot water is enough for a single bathroom
- Stainless steel heat exchanger and brass internal parts
- Parts are easy to find and engineers know the range well
- Easy-Fill link makes topping up pressure simple
Cons
- The original model is discontinued
- The original 630’s maximum heating output is 21.2kW, lower than many 30kW rivals
- Not suited to homes where two bathrooms are used at the same time
- Like any combi, flow drops if you open two hot taps together
- Fewer premium features than the Baxi 800 range or Worcester Bosch Greenstar models
What Size Home Does The Baxi 630 Suit?
It suits a typical two or three-bedroom house, or a larger flat, with one bathroom.
A shower over the bath plus an en-suite is fine if they’re rarely used together. If two showers run at once most mornings, you’d be better off with a 36kW combi or a system boiler with a cylinder.
For heating, the original 630’s 21.2kW maximum is plenty for most average-sized homes. A large or poorly insulated property may need more. We match output to the home’s heat loss and your mains water flow, not to the number of bedrooms. Our guide on how to size a combi boiler explains how that works.
How Much Does A Baxi 630 Cost To Install In 2026?
As a guide, a like-for-like swap to a 30kW combi costs around £1,800 to £2,600 fully installed. The original 630 isn’t made any more, so a new installation today means the 630 Combi 2 or an equivalent 30kW combi.
The guide prices below cover the boiler, flue, magnetic filter, chemical flush and labour. Your actual price depends on the job, your property and any extra pipework needed.
| Type Of Job | Guide Price Range (Installed) |
| Like-for-like combi swap, same position | £1,800 to £2,600 |
| Combi swap with boiler moved to a new position | £2,400 to £3,300 |
| Conversion from a system or regular boiler to a combi | £2,800 to £4,000 |
Conversions cost more. The old cylinder and loft tanks come out, pipework gets altered and you may need a new flue route.
For a fuller breakdown, see how much a new boiler costs. If you’d rather spread the cost, our guide to boilers on finance covers pay monthly options.
What Are The Best Alternatives To The Baxi 630?
The Baxi 630 Combi 2 is the easiest replacement, because it’s the direct successor in the same compact casing. These current models are also worth comparing:
- Baxi 630 Combi 2: the same 12.2 l/min flow rate, a higher heating output and the same casing. The simplest like-for-like swap.
- Baxi 830 Combi 2: a step up in Baxi’s range, with more features if you want a bit more from your boiler.
- Worcester Bosch Greenstar 4000: a strong choice if you prefer Worcester Bosch build quality. Compare the brands in our Baxi vs Worcester Bosch guide.
- Vaillant ecoTEC Pro 30: another popular 30kW combi for one-bathroom homes. Read our Vaillant ecoTEC Pro 30 review.
For a wider comparison, see our round-up of the best combi boilers.
Is The Baxi 630 Combi Worth It?
Yes, for a one-bathroom home the Baxi 630 has been a sensible, good-value combi that’s small and easy to service.
If your original 630 is under 8 years old, running well and serviced every year, there’s no reason to replace it yet.
Once it’s over 8 years old, efficiency has usually dropped and faults become more common. At that point, replacing it with a 630 Combi 2 is often better value than paying for repairs, and it’s usually a straightforward swap.
Choose it if:
- You have one bathroom and a typical two or three-bedroom home
- You want a compact boiler that fits in a kitchen cupboard
- You’re after a reliable mid-range boiler at a sensible price
- You’re swapping out an existing Baxi 600 combi
Look elsewhere if:
- Two showers regularly run at once in your home
- Your home is large or loses heat quickly
- You want premium features and don’t mind paying more for them
- Your mains water pressure is poor, which limits any combi
Get A Free Boiler Quote From Clever Energy Boilers
Clever Energy Boilers fits Baxi and other leading brands for homeowners and landlords across the North West, Yorkshire and the Midlands. Our experienced, professional and registered installers check your home’s heating needs and recommend the right size of boiler, not just the biggest one.
Every quote is fixed and clear. Long, market-leading warranties are available through Clever Energy on our new boiler installations.
To see what a new combi would cost for your home, get a free boiler quote online. It only takes a few minutes.
Frequently Asked Questions
Is The Baxi 630 Combi Discontinued?
Yes. Baxi has replaced the original 630 Combi with the 630 Combi 2. Spare parts for the original are still easy to find, but once one is over 8 years old, replacing it is usually the better option.
What Is The Flow Rate Of The Baxi 630?
It’s 12.2 litres per minute at a 35°C temperature rise. That’s enough for one shower at a time, and the 630 Combi 2 has the same figure.
Can The Baxi 630 Run On LPG?
Yes. The original 630 came in separate natural gas and LPG versions, while the 630 Combi 2 can be converted between the two by an engineer with no kit to buy.
How Long Does A Baxi 630 Combi Last?
Many keep running past 10 years, but by around 8 years old efficiency has usually dropped and faults become more common. At that point, replacing it is often better value than paying for repairs. Until then, an annual service is the best way to get the most from it, and our Clever Care servicing plans make that easy to keep up with.
Is The Baxi 630 Big Enough For Two Bathrooms?
Usually not, if both bathrooms are used at the same time. For two bathrooms in regular use, a 36kW combi or a system boiler with a hot water cylinder is the safer choice.






